3 Types of Stairs You’d Love in Your Home

Choosing a design for your staircase doesn’t only depend on how you want it to look. There are other factors, such as the available space, safety, and budget to consider. Take a look at the different options you have below:

Straight
A straight staircase is the most common and affordable style available. Pre-cut risers — the vertical part of the staircase — are available in lumber yards home stores and many builders use these because of their simplicity. The straight line design means that the staircase doesn’t need any special support and only needs to be attached at the top and the bottom. This type of staircase also allows for easier installation of railings and handrails.  Of course, there are variations of the straight staircase that include open risers, modern materials and metal cable railings that significantly alter the basic look. Source: Homedit

Spiral
The spiral staircase is certainly the most interesting design. It has a helical arc, resembling the shape of a spring. All of the treads are wedge-shaped, but as opposed to the winder and arched staircases, these treads are all consistent in size. There is a central vertical post around which the treads radiate.

Spiral stairs are found mostly in city loft apartments, due to its economical use of space, ease of installation, and limitations of capacity. A spiral staircase is not really suited to frequent use, as it has a confined area which is difficult to move upon. Only one person can navigate the stairs at any one time, and it is difficult to carry large items up or down on it. This is also why many building codes do not allow the use of spiral stairs as primary ingress to a full-sized second floor. Source: Homify

Bifurcated
The grandest of them all—this is the style of the iconic Titanic staircase—bifurcated stairs include one sweeping set of steps that splits off into two smaller flights going in opposite directions. Source: ArchitecturalDigest

It would be an honor to be a part of building your dream home. We have been in the business for over 55 years so rest assured that we can bring your imagination to life. Call us!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114

from Kerrisdale RD https://ift.tt/2Nldzsx

3 Areas Every Home Buyer Should Inspect

All houses are taken care of differently. Some are well-maintained, while others are not. Don’t make the mistake of buying a house with hidden damages waiting to surprise you. Make sure you do the following tips:

Check the attic
A well-functioning attic is crucial to protecting a home. If your home inspector can get into the attic without trampling insulation, you can often learn a lot about the home and any renovations or repairs. One very common inspection red flag is improper venting of bathroom fans into the attic (and not extending the vent all the way through the roof). If your bathroom fan is venting directly into the attic, all it’s doing is sending moisture and humid air into the attic where it cause mold, rot or worse. It’s also not up to code. If possible, have your inspector check for attic air leaks. While you can fix these attic air leaks, an attic with air leaks could have potential issues with insulation, moisture, mold or worse. Source: FamilyHandyman

Find out if there are proper drainages
“The biggest issue of any home is always going to be water disbursement,” Turner says. “There’s the potential for damage to the foundation. If water is found to be in the vicinity of the house, you want the water to flow away from the house, not towards it.” Source: Curbed

Take a close look at the roof
When your home inspector is checking out the roof, ask them about the condition of the shingles. Are there any that are buckling or missing? How about the eavestrough? Is there an accumulation of asphalt granules in the gutters? Are there signs of major wear and tear? If so, the home may be in need of a roof replacement.

A roof replacement isn’t cheap, so you can always ask that the sellers take care of replacing the roof, or you can ask for a price reduction to compensate. Source: HGTV

If you still want to buy the house despite damages in some areas, then consider renegotiating the price so you can have a budget for renovation. We can repair your home, and make it safe before you move in. Contact us!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114

from Kerrisdale RD https://ift.tt/2MyET7r

5 Roofing Mistakes To Avoid

Before you have your roof installed or repaired, learn about the most common mistakes that might occur so you can avoid them:

Incorrect installation
Every roofing manufacturer has specific regulations on how their roofs must be installed. Items, such as number of nails per shingle, can determine whether a manufacturer will stand behind their warranty should the roof fail earlier than the guaranteed lifespan.

Failing to get an attic
A roof is an entire system, comprised of many components. Proper attic ventilation is necessary. Without it, your shingles can wear out sooner than they should, your insulation can be ruined and your energy costs can skyrocket.

Not getting a roofing permit
In most cases, a permit is needed to install a new roof. The homeowner is the one held liable for failure to obtain a permit. Ramifications can include fines, forced removal of the new roof, or your insurance company refusing to insure the roof. Source: AngiesList

Buying cheap materials
As rational human beings, we will most probably go for the most affordable materials. The paradox of this belief is that cheap might be expensive because low-quality materials get damaged faster. To achieve the best roof repair, go for high-quality materials that will serve you for long. Your house will also look more presentable when you purchase the right products. You can do an online search or ask for recommendations from friends and relatives to know what material will work best for you. Source: FineHomesAndLiving

No leak barrier
The installation of the leak barrier is necessary since it provides extra protection in vulnerable areas or places with perforations due to nails or fasteners. The parts of the roof in which we recommend the installation of leak barriers are valleys, vertical walls, accessories, eaves, chimneys, and skylights, but it could vary depending on the region of the country in which you live. Source: GAF

We’ve been taking care of roofs in the Vancouver lower mainland area for more than 55 years. You can rest assure that your roof installation will be seamless with us. Call us to book an appointment!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114

from Kerrisdale RD https://ift.tt/2pAKGAg

3 Things to Know before Replacing Your Home’s Roof

Roofing is an expensive investment. And if it gets damaged, it’s important to keep the following in mind so you don’t spend more than you need to. Make sure you cover the following tips before starting your project:

Mind the paperwork
For such a quick job—two to five days, depending on the size and style of the roof—roofing involves a tremendous amount of liability and money. Three documents are essential: 1) Most towns require a building permit for a roofing project; this can help to ensure that your contractor follows building code. Plus, your roof warranty is likely void if you don’t get the permit. 2) A written contract that specifies all of the agreed-to details, products, and costs of the project. 3) A letter addressed to you from the contractor’s insurance carrier confirming that the specific project is covered under the roofer’s worker’s compensation and liability plan. Source: Money

Weigh the pros and cons of choosing an overlay
An overlay involves installing new shingles on top of the existing ones. Because the old roofing stays put, overlays require fewer labor hours and cost less than replacement.

Approach overlays with caution, however, as they may void or shorten the manufacturer warranty on roofing materials. And overlays typically increase future replacement costs since multiple layers will need to be removed the next time around. Source: NerdWallet

Keep an eye on the trash
Replacing your roof is going to generate a lot of trash and litter. This trash may be spread across your home during the installation. For instance, if the old roof came down with thousands of nails and most of them landed on your driveway or grass, they can cause injury to you, your pets, and your family. Also, they can deflate vehicle tires. Fortunately, most roofers have a giant magnet on wheels that is passed over the yard to grab metallic items such as nails and dropped fasteners. However, some roofers forget to bring it on site. Before making the final payment, ensure the roofer comes with the magnet and gets rid of dropped nails. Also, they should take care of the trash. Some roofers have dump trucks, making the process of trash management easy. Source: FineHomesAndLiving

Get your roof replaced by a roofing company who has a proven track record of quality work for more than 50 years. Call us for a free estimate!

 

Contact:
Kerrisdale Roofing & Drains
8279 Ross St, Vancouver, BC V5X 4W1
(604) 360-2114

from Kerrisdale RD https://ift.tt/32ku0vA