5 Useful Tips When Planning a Patio

Hanging out on the patio feels relaxing. It gives you a chance to enjoy the outdoors without having to go far, especially now that we’re all advised to stay at home. If you don’t have one, take a pen and paper, and start planning your project using the following tips:

Have ample space
Experts recommend a minimum of 25 square feet of patio per person and a minimum length of 16 feet. You need at least a 6 x 6 foot area out of any traffic path for a dining table and chairs. Next, ask yourself how you’ll be using the patio. Do you want space for a grill? Lounge chairs? Planters? Source: RD

Choose the right materials
Brick, concrete, slate, and flagstone are among the most popular patio surfaces, either alone or in combination. When selecting a material, consider factors beyond just cost. It’s always a good idea to match the style of your home, if possible. And if you’ll be dining regularly, select a surface that is smooth enough to keep tables and chairs from wobbling. Source: BHG

Consider your privacy
When you start to plan, think about the best position for your patio. Where does the sun sit in your garden at the time you’re most likely to use it? Also consider how you can take advantage of any views you have, or alternatively create a private retreat so you can enjoy relaxing in your garden without being overlooked.

Stick with your home’s style
The way you choose to decorate your home and design your garden is a reflection of your personal style, while incorporating your individual tastes, remember to be sensitive to the style of your house too. A modern house will suit more contemporary paving styles, while traditional paving lends itself well to period properties. Source: HouseBeautiful

Think about lighting
– Make your patio or deck livable after sunset by installing general and accent lighting.
– Use brighter lights for dining and seating areas and dimmer ones to outline patio edges and adjoining paths.

You may wish to install sound speakers as well. Source: YellowPages

We can build your dream patio for you. Get a free estimate when you call us today!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114

from Kerrisdale RD https://ift.tt/2z06E4m

3 Types of Roofing Shingles

Thinking about which type of roofing material to use for your dream home? Check out the following:

Clay
Clay tile is made from earthen clays molded into rolled or interlocking shapes and fired for hardness. It is often left unglazed, with the characteristic reddish-orange color; or it can be glazed and fired to form ceramic roofing tiles. Clay tile is a very good roofing material for hot climates or where salt air is present, which is why these roofs are seen so often in southern coastal regions or desert regions. Source: TheSpruce

Solar
Solar shingles offer an alternative to conventional rooftop solar panels, while also serving as a roofing material. While early versions of solar shingles and other solar roofing products used flexible “thin-film” solar technology, today’s solar shingles typically are made with rigid materials, such as tempered glass. This makes them look and perform more like conventional shingles, and most can be installed similarly to shingles and without special installation crews.

Of course, the greatest benefit of solar shingles is that they create electricity during daylight hours. As a result, roofing starts paying for itself from the day it is installed and over the entire lifetime of the system. It’s the only roofing material that offers a financial return on your investment. Source: TheBalancesMB

Slate
If you prefer the natural look of stone, slate shingles may be the solution for your roof. Like wood, slate is an environmentally friendly option. It can also help maintain the temperature inside your home, which can help with your utility bills. One of the biggest advantages of slate shingles is the longevity. They can last 80 to 100 years or longer if you take care of them well. Slate shingles hold up well against wind, hail, heat and moisture with a low risk of leaks. They also hold up well in snowy climates. Source: Hunker

We can help you choose the right material for your roof. As we have over 54 years of experience in installing roofing, you can rest assured that your investment will really last generations. Call us for a free estimate!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114

from Kerrisdale RD https://ift.tt/3bF145S

3 Quick Solutions for a Leaking Roof

Do you have an emergency roof leak and you can’t find a professional to repair it right away? Try out these easy fixes:

Cover with a tarp
A quick and very temporary fix for a leaky roof is to cover the damaged area with a plastic tarp. When using a tarp to cover your roof, the key is to cut the tarp so that it adequately covers the damaged area. Leave at least an extra four feet of tarp on each end to cover the roof damage. You will need to secure the tarp so that it does not blow off the roof. Using treated 2-by-4 boards is one way to secure the tarp to the roof. You can staple or nail the tarp to the boards, but be sure to use nails that are not so long that they will go through your roof. Source: Homesteady

Use sealants
If the leak is due to faulty or missing flashing, sealants might be the cure. Use sealants on all flashing around skylights and protrusions like a chimney or vent. You should never use them to fix shingles permanently. It may work as a stop-gap measure to fix broken or cracked shingles until you have time to replace them. Source: HomeAdvisor

Replace shingle

If part or all of a shingle is missing, head to the hardware store to find a matching replacement. To remove the broken shingle, carefully lift the edges of the shingle above it with a pry bar. Use a hammer to remove the nails at broken shingle’s 4 corners, slide it out, then scrape the area beneath to remove any leftover roofing cement.

– If necessary, use a blow dryer to make the surrounding shingles more pliable. After removing the old shingle, use a sharp utility knife to round the back corners of the new shingle; this makes it easier to install.
– Slide the new shingle into place, gently lift the shingle above, and drive 1¹⁄₄ inch (3.2 cm) galvanized roofing nails into the new shingle’s corners. If you removed any nails that secured the shingle above the broken one, replace them.
– Finally, use a trowel to apply roof cement over the nail heads and edges of the new shingle. Source: WikiHow

Even though you’re able to keep the roof from leaking using the tips above, don’t forget to schedule an appointment with us. We will provide a more permanent solution, so you won’t have to worry about roof leaks again. Call us!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114

from Kerrisdale RD https://ift.tt/2XIlOWg

Things You Need to Know About Hipped Roofing

Are you building a new house? One of the most important factors to consider is the type of roofing you will install. Get to know more about Hip Roof below, and discover why you should consider it as your number 1 option.

What is a hip roof?
A hip (or hipped) roof is one that meets all of the walls it connects to with a horizontal join. On a rectangular building, it is likely that each of the four sides of a hip roof will have the same pitch, making the roof a symmetrical structure.

The hip roof also tends to have eaves (that is, the roof overextends past the walls), and as the fascia is at the one level height, the gutters run in a continuous piece around the entire structure. A hip roof on a square building will resemble a pyramid, whereas on a rectangular building, the different parts meet in a ridge at the top of the roof. Source: Build

Variations
There are many configurations of hip roofs, including styles that blend hips with other types of roofs, and vice versa. Common variations include:

– Jerkin head:Also called a half-hip; a hybrid of a hip and gable roof, with each gable end adorned with a short hip at the top.

– Pavilion: A hip roof (on square building) with four equal sides meeting at a point in the center, forming a pyramid shape.

– Double-pitched hip:A hipped roof with a steeply sloped upper section and a more gently sloped lower section.

– Cross-hip:A roof with two or more intersecting hip roofs, typically forming an L or a T. Source: Hunker

Construction
Proper construction and maintenance is a must to prevent minor issues from turning into major problems. For instance, hip roofs have more seams than gable roofs, making it easier for water leaks to form if the roof is not properly installed.

One complaint about hip roofs is that they leave little attic space. It’s important to note though, what you may lose in attic space, you gain in increased ventilation for your home, as well as the vertical space for premium design features like vaulted ceilings, or simple additions like a crow’s nest, which could give your home yet another unique design feature. Source: Modernize

Proper installation is the key to a long-lasting roof. With more than 55 years of experience in handling anything roof-related, you know your money will not be wasted with us. Call us today for a free estimate!

 

Contact:
Kerrisdale Roofing & Drains
8296 Ross St, Vancouver, BC V5X 4C6
(604) 360-2114

from Kerrisdale RD https://ift.tt/2y2fNsG